Changing System Settings; Picture Settings; Language Settings; Time Settings - AEG 4546 Instruction Manual

AEG_BDA_DVB-S2_4546_GB.qxd:CL_BDA_DVB_T776_GB_ka.qxd

Changing system settings

Picture settings

Select the "Picture" menu.
Setting
Aspect ratio
Resolution
TV Format
Video Output
Carry out the desired settings.

Language settings

Select the "Option" menu.
Setting
OSD Language
Subtitle Language
Audio Language
Digital Audio
Banner time
Carry out the desired settings.

Time settings

Select the "Time" menu.
Setting
Time Auto
Time Zone
Date
Time
Sleep Timer
Carry out the desired settings.
Options Explanation
4:3 Full / Select between 4:3 format or 16:9 format (wide screen) according to your
4:3 Pan&Scan / screen.
4:3 Letterbox /
16:9 Wide Screen /
Auto
576i / 576p / 720p / Select the HDMI resolution for the playback device that you have connected
1080i and will use. The choice of the correct signal format depends on the
connector and the playback device used (consult the user manual to the
playback device).
PAL / NTSC / AUTO If you are not sure which TV standard is suitable, select "Auto".
CVBS / RGB Select the suitable video signal.
Options Explanation
You can select the required language for the screen menu.
Here you can select the preferred subtitle language.
Here you can set the preferred audio language.
Off / PCM / RAW This is where the settings for the digital audio socket are determined.
Off: Only an analogue, but no digital audio signal will be output.
PCM: A digital audio signal will be output, which will be converted into a
2-channel signal. Use these settings if you are using a 2-channel stereo
amplifier.
RAW: A digital audio signal will be output. Use these settings if you are not
using a two-channel stereo amplifier.
1 – 10 sec. Select the time after which the OSD is to fade out.
Options Explanation
On/off Here you can set whether the time zone should be set automatically.
Here you can set the corresponding time zone.
(Only possible if the option "Time Auto" is set to "Off".)
Use the number keys to enter the date.
(Only possible if the option "Time Auto" is set to "Off".)
Use the number keys to enter the time.
(Only possible if the option "Time Auto" is set to "Off".)
Here you set the time after which the device should switch to standby mode.
22.01.2010
You can carry out the following settings in the
submenus:
You can carry out the following settings in the
submenus:
You can carry out the following settings in the
submenus:
11:34 Uhr Seite 43
43