Advertisement
Step 3 Connect the Token Ring port to the network as shown in Figure 4.
Token Ring lobe cable
(not supplied)
DB-9 Token Ring
port connector
Back
Router
(top view)
Figure 4 Token Ring Cable Connections
Step 4 Connect the serial ports to the network as shown in Figure 5.
Serial port connector
Router
(top view)
Rear
EIA/TIA-232, EIA/TIA-449,V.35,
X.21, or EIA-530 connector
Figure 5 Serial Cable Connections
Step 5 Connect the console and auxiliary ports as required for your method of
configuration. Your terminal should be configured for 9600 baud, 8 data bits,
no parity, and 1 stop bits.
Step 6 Connect the power cable between the router and the AC source.
Standard
IEEE 802.5
connector
Media
attachment
unit
(MAU)
Serial transition cable
Modem
or
CSU/DSU
Installation
7
Advertisement
