Advertisement
Information for United Kingdom Use Only
Cisco Systems declaration of operating conditions:
The Cisco 2000 is designed to meet the requirements of NET1 and NET2.
Warnings
Interconnection directly, or by way of other apparatus, of ports marked:
"Safety Warning — See instructions for use"
with ports marked or not so marked may produce hazardous conditions on the network
and that advice should be obtained from a competent engineer before such a
connection is made.
The ports marked "Ethernet," "Token Ring," "Console," and "AUX" have a safety
warning applied to them as follows:
"These ports do not provide isolation sufficient to satisfy the requirement of BS6301;
apparatus connected to these ports should either have been approved to BS6301 or
have previously been evaluated against British Telecommunications plc (Post Office)
Technical Guides 2 or 26 and given permission to attach; any that other usage will
invalidate any approval given to this apparatus."
Connection of Power Supply. The Cisco 2000 is intended for use when supplied with
power from a supply providing 220-240 VAC, 50/60 Hz up to 5 Amps.
Other usage will invalidate any approval given to this apparatus if as a result it ceases
to comply with BS6301: 1989.
The Cisco 2000 is brought into service by the supplier.
Information for European Community Use Only
The ports marked "Ethernet," "Token Ring," "Console," and "AUX" are SELV
circuits. SELV circuits should only be connected to other SELV circuits.
Installation
5
Advertisement
