Cisco 2000 Series Hardware Installation page 4

•
Modem for remote configuration (if required)
•
Console terminal (configured for 9600 baud, 8 data bits, no parity, and 2 stop bits)
if future reconfiguration is desired
Information on Mounting the Router on a Rack or Wall
Rack and wall mounting procedures are described in a separate publication included
with the optional rack mount kit. If you intend to rack mount the router, do so before
making the external connections.
Preparing for External Connections
Following are the procedures for making external connections to the router. Figure 1
shows the rear panel of the router with the following connectors:
•
Ethernet DB-15 (2102) or Token Ring DB-9 (2202)
•
Serial DB-50 (1)
•
Console RS-232
•
Auxiliary RS-232
•
AC power cable
OK ETHERNET
SERIAL
2102
Interface activity
System OK light
indicator lights
OK TOKEN RING SERIAL
2202
Interface activity
System OK light
indicator lights
Figure 1 Router Front and Rear View—Models 2102 and 2202
Installation
4
Console port Ethernet port
(DB-25)
Power On/Off switch
AUX port (DB-25)
Serial port
Console port (DB-25) Power On/Off switch
AUX Token
Serial (V2)
port Ring
port
(DB-25)
port