First Start-Up - ABB ACS880+N5350 User Manual

8.1.2 First Start-Up

The following instructions explain how to start up the control panel for the first time.
1. Make sure that all drive-specific safety precautions have been taken into account.
2. Install the control panel as instructed in Installation.
3. Power up the drive.
The control panel start-up begins automatically. Wait until the control panel enters the language selection view.
Note: The language selection view only appears during the first start-up of the control panel, but it is possible to change the
language later in the Settings menu (see parameter 96.01) or with the set-up assistant.
4. Use or to select a language.
5. Press (OK) to confirm your selection.
Wait until the control panel completes uploading the language file. Its progress is indicated by a progress bar.
There is a Basic set-up assistant in the drive that the control panel prompts to begin the Cooling Tower Assistant. Details on
the assistant are contained in Chapter 12 of this manual.
Completing the assistant or Exiting returns you to the Home view. Once you are in the Home view, the control panel is ready
for use.
To return to the assistant screen, select Menu  Assistants  CTDD Setup.
Press Select to launch the assistant.
8-2 Keypad and Programming
Figure 8-2
English
Deutsch
Italiano
Espa
Portugues
Nederlands
Fran
Figure 8-3
ACS880
Cooling Tower Drive
ACS880
Figure 8-4
Remote CTDD
Cooling Tower Direct ...
Use arrow keys and soft keys to
Navigate the assistant
Exit 00:00
Figure 8-5
Local CTDD
Motor speed used
0.00
Motor current
0.00
Options 00:00
ň
ol
ç
ais
OK
0.0 rpm
Continue
0.0 rpm
rpm
A
Menu
3AXD50000011888