Selecting Units For Ai Blocks - GE DigitalFlow XGS868i Programming Manual

Appendix E. Foundation Fieldbus Communications
E.4 Selecting Units for AI Blocks
To select the units for the individual AI blocks:
1. Double click on the AI block for which you wish to set the units (ANALOG_INPUT_1 or ANALOG_INPUT_2 in the
tree under GEFlow-XGM; see Figure 56 on page 144).
2. Select the Scaling tab and set the unit for the measurement based on the flowmeter settings.
For example, if the flowmeter was set to use the metric unit system and the PRIMARY_SELECTOR was set to use
VELOCITY you would choose m/s for the unit as shown in Figure 58.
Figure 58: Units Index Drop Down List
146 DigitalFlow™ XGS868i Programming Manual