Motorola motoe6 User Manual page 134

Network and Internet
3.
Touch Wi-Fi hotspot and turn it on
the battery!
When your hotspot is active, you'll see
4. To connect a device, open the device's Wi-Fi settings, select your phone's hotspot and enter the hotspot
password. Learn how to find the hotspot's password.
Tip:
The first time that you turn the hotspot on,
bar down and touch
Manage hotspot connections
To view the number of devices connected to your hotspot:
•
In quick settings, look below
•
Or, go to Settings > Network & internet > Hotspot & tethering and look under Wi-Fi hotspot.
By assigning a password
knowledge or permission.
To disconnect all devices and prevent users from reconnecting:
1. Turn the hotspot off.
2. Change the password.
3. Turn the hotspot back on to continue using it.
Tip: When no devices are connected, the hotspot turns off automatically. To adjust this setting, go to
Settings > Network & internet > Hotspot & tethering > Wi-Fi hotspot > Advanced > Turn off hotspot
automatically.
View or change hotspot password
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot.
3. Touch Advanced > Hotspot password to see the current password.
4. To change the password, type over the current password.
Note: Although you can turn off passwords for your hotspot, keeping a password prevents unauthorised
usage of your mobile data.
USB tethering
To connect a device to the Internet using your phone's mobile data and a USB cable:
1. Check that mobile data is
share.
, then plug in your phone to charge. Using the hotspot really drains
to turn the hotspot off/on.
.
for your hotspot, you ensure that people can't connect to your hotspot without your
on. If mobile data is off, your phone doesn't have an internet connection to
in the status bar.
is added to Quick Settings. After that, just swipe the status
126