Power Cord Specifications - Cisco ASA 5506-X Installation Manual

Overview
Maximum altitude
IP rating
Extended vibe and shock
1
2

Power Cord Specifications

Note
This section applies only to the ASA 5506-X and ASA 5506W-X. It does not apply to the ASA 5506H-X.
Each power supply has a separate power cord. Standard power cords are available for connection to the security
appliance.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a non-compatible power cord with this product may result in electrical
safety hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered
with the system.
Only the approved power cords provided with the security appliance are supported. The following table lists
the supported power cords.
Table 1: Supported Power Cords
Description
CAB-ACE
AC power cord
(Europe)
CAB-AC
AC power cord
(North America)
CAB-ACA
AC power cord
(Australia)
CAB-ACI
AC power cord
(Italy)
Online Only
Operating: 10,000 ft (3048 m)
Nonoperating: 15,000 ft (4572 m)
IP40 per IEC60529 (ASA 5506H-X)
IEEE1613, IEC60068-2, IEC 61850-3 (ASA 5506H-X)
Derate the maximum operating temperature 1.5 degrees C per 1000 ft above sea level.
Derate the maximum operating temperature 1.5 degrees C per 1000 ft above 6,000 feet elevation.
Amperage
10A
10A
10A
10A
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
Voltage Plug
250V CEE 7 VII
125V NEMA 5-15P
250V A.S. 3112
250V CE123-16-VII
Power Cord Specifications
Connector
IEC 60320/C13
IEC 60320/C13
IEC 60320/C13
IEC 60320/C13
13