Filters; Wireless Mac Acl - D-Link Nuclias Connect DAP-2622 User Manual

D-Link DAP-2622 User Manual

Filters

Wireless MAC ACL

This page allows the user to configure Wireless MAC ACL settings for access control.
Wireless Band: Displays the current wireless band rate.
Access Control List: Select Disable to disable the filters function.
Select Accept to accept only those devices with MAC
addresses in the Access Control List. All other devices
not on the list will be rejected.
Select Reject to reject the devices with MAC
addresses on the Access Control List. All other devices
not on the list will be accepted.
MAC Address: Enter each MAC address that you wish to include in
your filter list, and click Apply.
MAC Address List:
When you enter a MAC address, it appears in this list.
Highlight a MAC address and click Delete to remove
it from this list.
Current Client
This table displays information about all the current
Information: connected stations.
To upload a ACL list file, click Browse... and navigate
Upload File:
to the ACL list file saved on the computer, and then
click Upload.
To download ACL list file, click Download and to save
Load ACL File to Hard
Drive: the ACL list.
59