Section 3 - Configuration
This page allows the user to configure Wireless MAC ACL settings for access control.
Wireless Band:
Displays the current wireless band rate.
Access Control List:
Select Disable to disable the filters function.
Select Accept to accept only those devices with MAC
addresses in the Access Control List. All other devices
not on the list will be rejected.
Select Reject to reject the devices with MAC
addresses on the Access Control List. All other devices
not on the list will be accepted.
Enter each MAC address that you wish to include in
MAC Address:
your filter list, and click Apply.
When you enter a MAC address, it appears in this list.
MAC Address List:
Highlight a MAC address and click Delete to remove
it from this list.
This table displays information about all the current
Current Client
connected stations.
Information:
D-Link DAP-2330 User Manual
Filters
Wireless MAC ACL
59