Hardware Overview; Leds; Connections - D-Link Nuclias Connect DAP-2622 User Manual

D-Link DAP-2622 User Manual
Solid Red
1 Power/Status Blinking Red
Solid Green

Hardware Overview

LEDs

1
Indicates the access point has malfunctioned.
This LED will blink during boot-up.
Indicates that the DAP-2622 is working
properly.

Connections

2
Connect to a Power over Ethernet (PoE) switch or router via
2 LAN (PoE) Port
an Ethernet cable.
3
Lan (PoE Out) Port Gigabit RJ-45 port for data and PSE out.
4 Ethernet LAN Port Gigabit RJ-45 port for data.
Press and hold for five seconds to reset the access point to
5 Reset Button the factory default settings. Press and hold for ten seconds
to reboot the access point.
5
3 4
7