Sony FVS-1000 System Maintenance Manual page 47
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
(6) After installing all the processor boards, attach the rear shield to the processor assembly with sup-
plied 10 screws. (for UC/CE model only)
n
The processor assembly can not be pulled out from the unit when the rear shield is attached.
When pulling out the processor assembly from the unit, remove the rear shield.
Rear shield
(for UC/CE model only)
Screws
Screw
(7) Connect the cable to the connector of the processor board.
(8) Attach the duct cover to the rear of the unit using supplied four screws. (for UC/CE model only)
FVS-1000 MMP1
Screws
Screws
Cable
1-11. Installation of Optional Units
Duct cover(for UC/CE model only)
B4 x 6
B4 x 6
1-35
Advertisement
Table of Contents
