4-2-2. Aperture Diameter Adjustment
Equipment
• Adhesive bond (B-10)
Adjustment Method
1)
Remove the 1 group lens block.
2)
Set the stepless aperture (M aperture) of the checked lens to the fully open state (set the index of the stepless aperture to "A"), and
check that the M iris feathers do not remain in aperture.
3)
Remove the adhesive bond of the three screws fixing the iris retainer tube.
M Iris Retainer Tube
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
1 Group Lens Block
Fig.4-2-9
A
Aperture Hold Ring
Fig.4-2-10
4-17
Adjustment Screws
for Aperture Diameter
(Three areas)