Black & Decker GPC1800 Instruction Manual page 6

ENGLISH
g. Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from those intended could result
in a hazardous situation.
5. Battery tool use and care
a. Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
b. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
c. Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
d. When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
e. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
6. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Additional safety instructions for pole pruners
The intended use is described in this instruction manual.
Do not use the tool for purposes not intended; for example do
not use the tool to fell trees. The use of any accessory or
attachment or performance of any operation with this tool
other than those recommended in this instruction manual may
present a risk of personal injury.
Wear close fitting and protective clothing including a safety
x
helmet with visor/goggles, ear protectors, non-skid safety
footwear, protective bib trousers and strong leather gloves.
Always position yourself out of the path of falling
x
branches.
The safe distance between a branch to be felled and
x
bystanders, buildings and other objects is at least 2 1/2
times the length of the branch.
6
Any bystander, building or object within this distance is at
risk from being struck by the falling branch.
Pre-plan a safe exit from falling trees or branches.
x
Ensure the exit route is clear of obstacles that would
prevent or hinder movement. Remember wet grass and
freshly cut bark is slippery.
Ensure someone is nearby (but at a safe distance) in case
x
of an accident.
Do not use the tool while standing in a tree, on a ladder
x
or on any other unstable surface.
Keep proper footing and balance at all times.
x
Hold the tool firmly with both hands when the motor is
x
running.
Do not let the moving chain contact any object at the tip
x
of the guide bar.
Start cutting only with the chain moving at full speed.
x
Do not attempt to enter a previous cut. Always make a
x
fresh cut.
Watch for shifting branches or other forces that could
x
close a cut and pinch or fall into the chain.
Do not attempt to cut a branch when the diameter of the
x
branch exceeds the cutting length of the tool.
Always remove the battery from the tool and place the
x
chain cover over the chain when storing or transporting
the tool.
Keep the saw chain sharp and properly tensioned.
x
Check the tension at regular intervals.
Switch the tool off, allow the chain to stop and remove
x
the battery from the tool before carrying out any
adjustment, servicing or maintenance.
Only use genuine replacement parts and accessories.
x
Pruning
Before attempting to prune a tree, ensure there are not
by-laws or regulations that would prohibit or control the
felling of the tree.
Be aware of the direction a branch may fall. Consider all
x
conditions that may affect the direction of fall, including:
- the length and weight of the branch to be cut
- the intended direction of fall
- any unusual heavy limb structure or decay
- the presence of surrounding trees and obstacles,
including overhead lines
- the intertwinement with other branches
- the speed and direction of the wind
Consider access to the tree limb.
x
Tree branches are liable to swing towards the tree trunk.
In addition to the user, any bystander, building or object below
the branch is at risk of being struck by the branch.