ABB Relion 615 series Applications Manual page 43

1MRS756885 A
REM615
Application Manual
GUID-9F82AC98-808F-4820-BB71-A48445FAC7B4 V1 EN
Figure 20: Common alarm/indication 1-5
The signal outputs from the IED are connected to give dedicated information on:
• Start of any protection function SO1 (X100:10-12)
• Operation (trip) of any protection function SO2 (X100:13-15)
• Motor startup indication to upstream level SO1 (X110:14-16)
• Motor thermal overload alarm indication SO2 (X110:17-19)
• Operation (trip) of any voltage protection function SO3 (X110:20-22)
TPGAPC are timers and used for setting the minimum pulse length for the outputs.
There are four generic timers (TPGAPC1..4) available in the IED. The remaining
ones not described in the functional diagram are available in PCM600 for
connection where applicable.
Section 3
REM615 variants
37