1MRS756885 A
REM615
Application Manual
GUID-B622B909-E854-4539-BBD9-D6F295867CDF V1 EN
Figure 19:
Disconnector position indication
There are three disconnector status blocks (DCSXSWI1...3) available in the IED.
The remaining two not described in the functional diagram are available in
PCM600 for connection where applicable.
The binary inputs 5 and 6 of the additional card X110 are used for busbar
disconnector (DCSXSWI1) or circuit-breaker truck position indication.
Table 13:
Device positions indicated by binary inputs 5 and 6
Primary device position
Busbar disconnector closed
Busbar disconnector open
Circuit breaker truck in service position
Circuit breaker truck in test position
The binary inputs 7 and 8 (X110:1-13) are designed for the position indication of
the line-side earthing switch.
REM615 variants
Input to be energized
Input 5 (X110:8-9)
x
x
Section 3
Input 6 (X110:10-9)
x
x
35