Startup Procedure - Hitachi IR.Station Hardware Manual

6.2 Startup Procedure

Check wiring (particularly the power
Check the rotary switch setting.
Check the number of points of the
Turn on power.
TX/RX indicator ON?
Set the station information table
Start
supply wiring).
OK
OK
I/O module.
OK
YES
End
correctly.
NG
Set the rotary switch correctly.
NG
Set the number of points of
the I/O module correctly.
NO
NG
Check the setting of the station
information table.
OK
Reset the CPU module.
- 35 -
6 SETTING