I/O Address Setting - Hitachi IR.Station Hardware Manual

6 SETTING

6.1 I/O Address Setting

(1) Input and output modules can be mounted any place in the mount base (free location).
A module in a slot always has the same I/O address whether the module is an input module or an
output module.
For example, when a DI module in slot 0 has an I/O address X140 to X14F, a DO module in the
slot 0 has an I/O address of Y140 to Y14F.
(2) The user can specify an address and a data size for each I/O slot.
For details of setting, refer to the HARDWARE MANUAL OPTION IR.LINK (manual number
SME-1-117) and SOFTWARE MANUAL OPTION IR.LINK For Windows® (manual number
SAE-3-155).
Short-circuit the slot number setting terminals according to the type of the DI/DO
module to be mounted. For example, connect between 32M and COM terminals
when a 32-point module is mounted.
CAUTION
- 34 -