Menu System; Switching Modes - Kenwood KDC-PS9070R Instruction Manual

Basic operations

Menu System

To accommodate a greater number of functions, a menu
system has been employed for making settings. Press the
MENU button to enter the menu mode and then display the
function to make the setting. Details on each setting are
explained separately in the corresponding function page.
1
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
2
Selecting function to set
Press the ¢ button to search through the functions until you
see the one you want to adjust in the display.
Press the 4 button to search through the functions
backward.
Example: If you want to switch the tuning mode from Auto1 to
manual, first search through the functions until you
see "Auto 1" in the display.
3
Changing setting for currently displayed function
Press either the AM or FM button.
The setting will change for each function.
Example: The tuning mode will switch from Auto 1 to Auto 2.
Pressing the button again switches the setting to
manual, and "Manual" is displayed.
4
Ending the menu mode
Press the MENU button.
The selection includes:
Touch Sensor Tone (Beep ON / OFF)
<Manual> (Clock Adj ,Clock Adjust*
Adjustment* 6 (SYNC ON / OFF)
Selectable Illumination (Color Green / Color Amber)
Time Adjustment* 1
2 ) Automatic Time
Mask key (Mask key)
Dimmer
— 8 —
level adjustment* 7 (Bright ##)
(Contrast ##) Dimmer (Dimmer ON / OFF)
Graphic Display* 7 (Graphic ON / OFF)
MASK OFF / ON) Switching Preout *
Dual zone system* 3 / 7 (Zone 2 OFF/ON)
Control (AMP BASS Flat, FLT /+6/+12)
Setting (Open SW# / OPEN SW#)
(NEWS OFF/##MIN) Local Seek*
Selecting Tuning Mode* 9
Memory Entry* 9 (A-Memory, Auto-Memory)
(AF ON/OFF) Region Restrict Function*
ON/OFF) Auto TP seek*
Reception* 4 (Mono, MONO OFF / ON)
Manu / Auto) Touch Sensor Tone
* 1 When Automatic Time Adjustment is off
* 2 Time adjustment mode entered
* 3 In AUX mode
* 4 In FM reception of Tuner mode
* 5 In FM, CD, or External disc control mode
* 6 Except in AMband
* 7 KDC-PS9070R Only
* 8 KDC-8070R/8070W/7070R Only
* 9 In Tuner mode
* 10 KDC-8070R/8070W Only
NOTE
• Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function, the
News Bulletin function with PTY news timeout setting, and the
Alarm function.
• The News function turns on when the setting is made for the
news interruption interval. The "##MIN" display indicates the
setting selected for the news interruption timeout interval.
• The "##" display indicates the setting value.

Switching Modes

Switching Modes:
Each time you press the SRC button, the mode switches as
follows:
Contrast Adjustment* 8
Switching
Black Mask (BLK
10 (SWPRE Rear / N-Fad)
External AMP
Manual Open Switch
News Bulletin Function
9 (Local. S OFF/ON)
(Auto 1/Auto 2/Manual) Auto
AF Function*
6 (Regional, REG
6 (ATPS ON/OFF) Monaural
Text Scroll* 5 (Scroll
6