Switching Preout; Navigation Mute Function; Dimmer; Automatic Dimmer Function - Kenwood KDC-PS9070R Instruction Manual

Other features
Function of the KDC-PS9070R / KDC-8070R / KDC-8070W

Switching preout

Switch the preout between the rear and non-fading. When you
switch to non-fading, you can adjust the volume separately. The
factory default is rear preout.
Switching the preout: (KDC-8070R/8070W only)
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2 Press the ¢ button repeatedly until the Switching preout
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "SWPRE Rear" or "SWPRE
N-Fad" in the display, indicating that the current preout is rear or
non-fading, respectively.
"SWPRE Rear" (Rear preout)
"SWPRE N-Fad" (Non-fading preout)
3
Switching settings
Press either the AM or FM button.
The display and setting will change.
4
Press the MENU button to end the menu mode.
NOTE
You cannot use the high-pass filter with non-fading preout.
Turning non-fading output On/Off :
Hold down the NF button for one second or more to set the
function ON or OFF.
"NF ON" is displayed when the non-fading output is set ON.

Navigation Mute Function

When the KENWOOD Navigation System is connected, an
interruption of the audio guide results in the temporary
lowering of the audio level.
NOTE
The Navigation mute function cannot be used unless a TEL mute
cable is connected to the KENWOOD Navigation System.

Dimmer

You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer cable
is not connected.
Turning Dimmer On/Off:
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2 Press the ¢ button repeatedly until the Dimmer function
appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "Dimmer ON" or "Dimmer
OFF" in the display, indicated that the current dimmer setting is
on or off, respectively.
3
Switching settings
Press either the AM or FM button.
The display and setting will change.
4
Press the MENU button to end the menu mode.

Automatic Dimmer Function

The display dims when the car's lights are turned on.
NOTE
The dimmer function is not available for units if the dimmer cable
is not connected.

TEL Mute

Shut down the audio system temporarily whenever an
incoming call is received.
NOTE
The function will not work if a cable is not connected to the car
— 30 —