Connecting Cables To Terminals - Kenwood KDC-PS9070R Instruction Manual

Connecting Cables to Terminals

Connector Function Guide
Pin Numbers for
Cable Colour
ISO Connectors
External Power
Connector
A–4 Yellow
A–5 Blue/White
A–6 Orange/White
A–7 Red
A–8 Black
Speaker
Connector
B–1 Purple
B–2 Purple/Black
B–3 Gray
B–4 Gray/Black
B–5 White
B–6 White/Black
B–7 Green
B–8 Green/Black
Battery cable (Yellow)
Ignition cable (Red)
A–7 Pin (Red)
A–4 Pin (Yellow)
FM/AM antenna input
Display Data Output
Jack
Outputs data
Functions
representing the unit's
current state, causing it
to appear in the external
display.
To connect to this jack,
Battery
a converting adapter
(optional) is necessary.
Power Control
(KDC-8070R/8070W
Dimmer
only)
Ignition (ACC)
Earth (Ground)
Connection
Fuse (10A)
+
Rear Right ( )
–
Rear Right ( )
Wiring harness
+
(Accessory1)
Front Right ( )
–
Front Right ( )
+
Front Left ( )
–
Front Left ( )
+
Rear Left ( )
–
Rear Left ( )
Connector A
8
7
8
Connector B
7
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
Antenna Cord (ISO)
KENWOOD disc changer/DAB control input
NOTE
To connect the Disc changer or DAB unit, consult each
manual.
DC/DC converter box
2CAUTION
(Wrap the cushion
(accessory9) around this Separate this box from the unit and antenna cords. If they
box.)(KDC-PS9070R only) are too close, it may cause the reception to get noise.
External amplifier control cable
(Pink / Black)
EXT.AMP
TEL mute cable (Brown)
TEL MUTE
If no connections are
made, do not let the cable
come out from the tab.
Power control / Motor
antenna control cable
(Blue/White)
P.CONT.OUT
6 4 2
5 3 1
6 4 2
5 3 1
— 40 —
Non-fading right output (Red)
(KDC-PS9070R only)
Non-fading left output (White)
(KDC-PS9070R only)
Rear right output (Red) / Non-fading right output
(Red) (KDC-8070R/8070W)
Rear left output (White) / Non-fading left output
(White) (KDC-8070R/8070W)
Front right output (Red)
Front left output (White)
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
NOTE
To connect the KENWOOD navigation
system, consult your navigation manual.
Connect either to the power control terminal
when using the optional power amplifier, or to
the antenna control terminal in the vehicle.