Miele PG 8583 CD Operating Instructions Manual page 45

Process chemicals
Efficacy
The ingredients in process chemicals have
a strong influence on the longevity and
functionality (throughput) of the dispensing
system.
Process chemicals can damage elastomers
and plastics in the cleaning machine and
accessories.
Hydrogen peroxide can release large
amounts of oxygen.
The following process chemicals can cause
large amounts of foam to build up:
- Cleaning agents and rinsing agents
containing surfactants
Foam can occur:
- In the programme block in which the
process chemical is dispensed
- In the following programme block if it has
been spilt
- In the following programme with rinsing
agent if it has been spilt
Chemical processes and technology
Measures
- Follow the process chemical
manufacturer's instructions and
recommendations.
- Carry out a regular visual check of the
dispensing system (suction lances, hoses,
dispenser canisters, etc.) for any damage.
- Regularly check the flow rate of the
dispensing system.
- Ensure that the regular cycle of
maintenance is observed.
- Please contact Miele for advice.
- Follow the process chemical
manufacturer's instructions and
recommendations.
- Carry out a regular visual check of any
accessible elastomers and plastics for
damage.
- Use only validated processes.
- The wash temperature must be lower than
70 °C when using hydrogen peroxide.
- Please contact Miele for advice.
- The process parameters in the wash
programme, such as dispensing
temperature, dosage concentration, etc.,
must be set to ensure the whole process
is foam-free or very low-foaming.
- Please observe the process chemical
manufacturer's instructions.
45