Replacement Parts And Accessories - Honeywell HW100 Important Instructions & Warnings

REPLACEMENT PARTS AND ACCESSORIES

• Internal Safety Plate for HW200:
• Internal & External Safety Plate for HW100:
External Safety Plate for HW200
• Replacement sweat band:
WARNING: The safety plates specified in the manual are certified with symbol B for high speed
particle, use only replacement parts specified in the manual. Use of any other safety plate will
compromise eye and face impact protection and may result in permanent eye injury and vision loss.
CONSTRUCTION AND ASSEMBLY FIGURE FOR HW200
1. Lens frame
2. Inner/Outer protection lens
3. Automatic darkening filter
4. Inner protection lens
5. Head band
6. Angle adjustment plate
7. Sweat band
8. Headband adjusting knob
Tigerhood Book.indb 11
HWCL600 (package of 5 ea.)
PC90110 (package of 5 ea.)
HWSB01 (package of 10 ea.)
9. Plastic screw
10. Pin stop
11. Block nut
12. Shade knob
13. Sensitivity knob
14. Delay knob
15. Grind mode switch
16. Low battery LED
GB_AU_NZ-11
3/14/13 4:36 PM