Jam (Main Body); 0101/0102 Jam Code Owing To The Slack Of The Lifter Wire - Canon imageRUNNER ADVANCE C5000 Series Technical Workbook

Service work
When the symptom has occurred, prepare the new Release Holder Shift Cam HP Sensor (WG8-5848-000)
and replace the old sensor with the new one.
[Reference] It is required to remove the hopper unit before replacing the Release Holder Shift Cam HP
Sensor.
Refer to the below FAQ:
Title: "E025-0x10 appears because of failure in bottle attachment and detachment operation and home
position detection signal"
Procedure: "b) Removing the Hopper Unit (Bk)" and "c) Removing the hopper unit (Y)/ (M)/ (C)"
[Replacement part]
WG8-5848 Release Holder Shift Cam HP Sensor

Jam (Main Body)

Symptom

0101/0102 jam code owing to the slack of the lifter wire

TP11 249
Symptom
On the devices of the serial numbers before the following (earlier than those in the below table), 0101 jam
may occur when paper is picked up from the right deck or 0102 jam may occur when paper is picked up from
the left deck.
77