Bookelet/Staple Finisher-A1; 1121 Jam Code Due To The Feeding Roller Pressure Was Uneven (Staple Finisher-A1/Booklet Finisher-A1) [G] - Canon imageRUNNER ADVANCE C5000 Series Technical Workbook

23) Reassemble the parts in reverse procedure from step 19) to step 14). Then put the inner cover and close
the feeder cover.
24) Place originals on the original tray and scan or copy to make sure that pickup operation has no problem.
[Replacement parts]
- FE3-4556 LIMITER, TORQUE
- FC8-5907 LIMITER, TORQUE
- FM4-9078 ARM SENSING SHEET SET

Bookelet/Staple Finisher-A1

Symptom

1121 Jam Code due to the feeding roller pressure was uneven (Staple Finisher-A1/Booklet Finisher-A1) [G]

Description
Jam code 1121 is not in the book. The last sheet jams when going into the upper or lower tray of the Finisher.
It does not jam when paper is delivered to the Finisher top tray.
Field Remedy
Found that the upper entrance guide pressure was uneven. The operator side was touching but the non
operator side was slightly lifted. Adjusted the assembly and now it sits even and does not jam. The assembly
could get tweaked if attempts are made to lower the unit with out releasing it from th up position.
102