Page 3
Technical certificate Technical certificate Arc-wall vent sash Follow the greenhouse vent sash assembly instructions and use it in strict accordance with the manual and operating rules stated in the technical certificate. Please keep the technical certificate for further reference. marking name quantity (pcs) dimension (mm)
Technical certificate Operating rules Flat vent sash marking name quantity (pcs) dimension (mm) 1st package The vent sash should be framed and 01ф/3 vent sash elevation installed in a greenhouse according the manual before the exploitation. 02ф clamp band 03ф little diagonal The vent sash should not be damaged.
manual manual Assembly instruction Assembly instruction Determine the place of the vent sash. Drill 4 holes Ø7 in the beams (fig. 1). Install two guides 05ф (fig.1) in the Install right and left brackets on them. (fig.2), observing chosen place. The guides 05ф are their position on the holes installed on the beams in the pre- drilled holes of the greenhouse.
Page 6
manual manual Assembly instruction Assembly instruction Drill 5 holes Ø∅7 along the axis of the lower beam and 6 holes on the Frame the vent sash using the details 01ф, 02ф, 03ф, 04ф. Install the top beam at 7 mm. distance from the edge. Install the packing on the window butt on the vent sash with the screws M5*10 and nuts M5.
Page 7
manual Assembly instruction A polycarbonate piece tape with scotch (close the cells) and screw it to the frame of lift-off butt the vent sash with the screws M5*35 and nuts M5 (fig.6) polycarbonat Do not screw until tight in order not to damage the polycarbonate places of Fig.6...