Sony DVS-7200A Installation Manual page 13

<Type 3>
This Type's Optional Boards
Slot No. Optional board
7, 9 UP-10 board (BKDS-7280)
WKG-12 board (BKDS-2070)
or
WKG-27 board (BKDS-7370)
11 UP-10 board (BKDS-7280)
WKG-12 board (BKDS-2070)
or
WKG-27 board (BKDS-7370)
12, 13 DA-94 board (BKDS-7161)
SD-48 board (BKDS-7163)
16 to 18 ADI-3 board (BKDS-7111)
DI-34 board (BKDS-7113)
After checking the installation direction of the optional board by its connector number, connect the
optional board to the connectors on the pre-installed board.
n
When installing the optional boards, confirm that the connectors are tightly connected. If the connectors
cannot be completely connected, the optional board may be placed in the other way.
Shield plate
ADI-3 board or DI-34 board
ADC-21 board
Removal of WKG-27 board
Pinch the board spacers on the board using a pair of long-nose prier, releasing the lock. Then pull out the
WKG-27 board.
n
A spacer that was attached on the WKG-27 board remains on the MIX-35 board.
DVS-7200AE IM
Pre-installed board
MIX-35 board
MIX-35 board (BKDS-7250 when using BKDS-7025/7026)
or
MIX-35 board (BKDS-7340 when using BKDS-7015)
MIX-35 board (BKDS-7250 when using BKDS-7025/7026)
or
MIX-35 board (BKDS-7340 when using BKDS-7015)
OUT-9 board
ADC-21 board (BKDS-7110)
WKG-27 board
Spacer MIX-35 board
DA-94 board or SD-48 board
OUT-9 board
Spacers
WKG-12 board
WKG-27 board
UP-10 board
MIX-35 board
4-3. Installation of Options for DVS-7200A
4-11