Makita BO5030 Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY (cont.)
ASSEMBLING
Do the reverse of the disassembling steps.
When fixing Washer 9 to Armature shaft, face the convex portion to outside as illustrated in Fig. 12.
After mounting Fan 88 to Armature ass'y, fix Skirt R and Skirt L. The position of Skirt set can be fixed at eight directions.
When disassembling Skirt set, check the owner's desired direction of the dust exit of Skirt and to set Skirt set in place in
reassembling. (Fig. 13)
Fit Brake ring into Skirt set as illustrated in Fig. 14.
Fig. 12
convex portion of
Washer 9
Fig. 14
protrusions on
the rim portion
of Brake ring
Fig. 13
dust exit of Skirt set
groove on Skirt set
rim portion of Brake ring
Note: 1) Face the rim portion to the machine side.
2) Fit the protrusions on the rim portion of
brake ring into the notches of Skirt set.
3) Insert the rim portion of Brake ring into
the groove on Skirt set.
notches of
Skirt set
P 4/ 7