Display Icons - GE AvantaPure Professional Series Operation Manual

Display Icons

Figure 15
32
Rev H
9
In normal operation and during programming, only a few of the
icons will actually be displayed.
1. Displays amount of conditioning capacity remaining.
2. "PM" indicates that the time displayed is between 12:00 noon and
12:00 midnight (there is no AM indicator). PM indicator is not used if
clock mode is set to 24-hour.
3. When "MIN" is displayed, the value entered is in minute increments.
4. When "LBS" is displayed, the value entered is in pounds.
5. When "Kg" is displayed, the value entered is in kilograms or kilograins.
6. Four digits used to display the time or program value. Also used for
error codes.
7. Colon flashes as part of the time display. Indicates normal operation.
8. X100 multiplier for large values.
9. Shows when water is flowing through the valve.
10. Banner display.
10
PM
MIN
LBS
KG
x100
7
6
1
4
2
3
4
5
8