3-2.
Monitor Image is not Output Correctly
Power of XVS-8000 is turned
on, but the image is not
output to the monitor
correctly.
Is the standard board
inserted into the specified
slot correctly?
YES
Is the optional board
inserted into the specified
slot correctly?
YES
Is the input/output cable
connected correctly?
YES
Is the software installed
correctly?
YES
The possible cause is the
failure of XVS-8000.
XVS-8000-C/XVS-8000
Insert the standard board into
NO
the specified slot correctly.
(Refer to "1-1. Location of
Main Parts")
Insert the optional board into
NO
the specified slot correctly.
(Refer to Section 1-4 of
the Installation Manual.)
Check the connection of the
NO
input/output device.
Perform the installation of
NO
software.
(Refer to the User's Guide.)
3-2