Image Output - Sony MVS-8000 User Manual

Image output

Moving the output image (reposition function)
For up to two channels of FM1 to FM8 (one from FM1, FM3, FM5 and FM7
and the other from FM2, FM4, FM6 and FM8), you can move the output image
with respect to the screen. The area of the screen around the image that has
been moved is filled with black. There are two ways of carrying out this
repositioning.
Normal mode: Movement in the horizontal direction is in two-pixel
increments.
Black and white mode: Movement in the horizontal direction is in one-pixel
increments, and for each pixel moved the color is inverted.
Note
It is not possible to save an image moved with the reposition function directly
to frame memory.
Fixing the output image selection (lock function)
For the output of each of FM1 to FM8, this fixes the image at the current
output. When this lock is enabled, even if the output is recalled in a snapshot
or keyframe, the images output to FM1 to FM8 are preserved.
Continuously capturing images (record)
You can continuously capture (freeze) and store a sequence of frames over a
specified time interval.
The images recorded in this way have eight-character file names "anmxxyyy".
(anm is fixed. xx is a two-digit number from 00 to 99, which is incremented for
each recording operation. yyy is a three-digit number from 000 to 999, which
is incremented for each frame captured.)
Note
When using the record function to continuously capture frames, it is not
possible to use the mask function.
Recalling a continuous sequence of images (animation)
You can use a continuous sequence of images captured with the record function
as keyframes to create an effect. By executing this effect you can recall the
continuous sequence (animation).
Notes
• For example, to create an effect using FM1, FM1 must be assigned to a user
region. (For details of user region settings, see "Settings for Switcher
Configuration (Config Menu)" in Chapter 16 (Volume 2).)
81
Frame Memory