Grizzly EXTREME Series Owner's Manual page 27

Table Controls
Depth of Cut Scale
& Pointer
Outfeed Handwheel
& Lock
Figure 30. Table controls.
Depth of Cut Scale & Pointer: Indicates the
amount of workpiece surface that will be removed.
Marked in ⁄ " increments.
1
16
Infeed & Outfeed Handwheels & Locks: Raises
and lowers the respective table. Rotate the
handwheels clockwise to raise and counterclock-
wise to lower the table. Tighten the lock knob in
the center of the handwheel to secure the setting.
Fence Controls
Fence Tilt
Handle
Fence
Lock
Fence Stops
Figure 31. Fence controls (Model G9860 and
G9860ZX).
Fence Lock: Locks the fence assembly in place.
Fence Tilt Handle: Tilts the fence when the tilt
lock is loose.
Extreme Series Jointer (Mfd. Since 10/20)
Infeed Handwheel
& Lock
Fence Tilt Lock
Fence Tilt Handle
Fence
Tilt Lock
90º Stop 45º Stop
Figure 32. Fence controls (Models G9953ZX,
and G9953ZXF).
Fence Tilt Lock: Locks the fence tilt angle in
place when tightened.
Fence Stops: Provide positive stops for the fence
at 90° and 45°.
Fence Adjustment Handwheel (Model 9953ZX/
G9953ZXF): Moves the fence forward and back
when rotated.
Cutterhead Brake (Model G9953ZX/
G9953ZXF Only)
Figure 33. Cutterhead brake.
Cutterhead Brake: Turns the machine OFF and
brings the cutterhead to a rapid stop when the
handle is rotated.
Adjustment
Handwheel
Fence
Lock
Cutterhead
Brake Handle
-25-