Snmp Configuration; Chapter 21 Snmp Configuration; Figure 151 Menu 22 Snmp Configuration; Table 84 Menu 22 Snmp Configuration - ZyXEL Communications NWA-3160 Series User Manual

C
H A P T E R
This chapter explains SNMP Configuration menu 22. See the web configurator chapter on
SNMP for background information.

21.1 SNMP Configuration

To configure SNMP, select option 22 from the main menu to open Menu 22 – SNMP
Configuration as shown next. The "community" for Get, Set and Trap fields is SNMP
terminology for password.

Figure 151 Menu 22 SNMP Configuration

The following table describes the SNMP configuration parameters.

Table 84 Menu 22 SNMP Configuration

FIELD
SNMP:
Get Community
Set Community
Trusted Host
Trap:
Community
ZyXEL NWA-3160 Series User's Guide

SNMP Configuration

Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Type the Get Community, which is the password for the incoming Get- and
GetNext requests from the management station.
Type the Set Community, which is the password for incoming Set requests from
the management station.
If you enter a trusted host, your ZyXEL Device will only respond to SNMP
messages from this address. A blank (default) field means your ZyXEL Device will
respond to all SNMP messages it receives, regardless of source.
Type the trap community, which is the password sent with each trap to the SNMP
manager.
21
219