Advertisement
Playing a Built-in Song
1
1 2
Press a number of times until the SONG LED is lit.
SONG
PIANO/CLASSICS
C2
C3
To play the song
To sound a count
2 3
2 3
To practice a particular part
2 3
One low-pitch beep: Normal playback
One high-pitch beep: Right-hand part muted for right-hand part practice
Two high-pitch beeps: Left-hand part muted for left-hand part practice
Three high-pitch beeps: Both-hand parts muted for both-hand practice
Playing a Rhythm
1
1 2
Press a number of times until the RHYTHM LED is lit.
RHYTHM
16 BEAT
DANCE
8 BEAT
BALLAD
POPS
ROCK
JAZZ
EUROPEAN
C2
C3
To insert a fill-in
To sound the accompaniment pattern with chords
Use the chord input keyboard to play chords.
Chord input keyboard
Lit
Hold down.
EVENT
WORLD
C4
C5
C6
3 4
Lit
Hold down.
3 4
Lit
Hold down.
LATIN
INDIAN
C4
C5
C6
Chord Progression Example
Input the following chords for the progression:
C3F3C3G.
Inputting a chord when there is a change from one measure
to the next is recommended.
C
F
C
G
Configuring Function Settings
Select a function.
Lit
Hold down.
To initialize a setting
Lit
C7
Hold down.
Specify the battery type
Product Specifications
Model: CT-S100
Keyboard: 61 keys
2 3
Maximum polyphony: 32 tones
Sound Source: 122 preset tones
Effects: Reverb (4 types, Off)
Metronome: Bell sound off, 1 to 16 beats; Tempo Range: 20 to 255
Song Bank: 60 preset songs; Part Off Function: Left-hand, right-hand, both-hand
Auto Accompaniment: 61 preset rhythms, chord input mode switching
Demo Function: Looped play of all built-in Song Bank songs (60 songs)
Function Volume Adjustment: Metronome, Rhythm, Song
Other Functions: Transpose (±1 octave; –12 to 0 to +12 semitones), Tuning (A4 = 415.5 to
465.9 Hz; Default = 440.0 Hz)
PIANO RHYTHMS
Input/Output Terminals: PHONES/OUTPUT jack: Stereo mini jack (3.5mm); USB port:
WORLD
VARIOUS
micro B
Power Jack: 9.5VDC
Power Supply: 2-Way Power; 6 AA-size alkaline batteries or AA-size rechargeable
C7
nickel metal hydride batteries, Continuous operation: approximately 16 hours (alkaline
batteries), approximately 13 hours (rechargeable nickel metal hydride batteries)*, actual
battery life may be shorter depending on battery type, performance style, or operation
environment; AD-E95100L AC adaptor (JEITA Standard, with unified polarity plug),
30-minute Auto Power Off (Can be disabled.)
* Measured values while using eneloop batteries.
eneloop is a trademark of Panasonic Corporation.
Speakers: 13 cm × 6 cm (oval) × 2 (Output: 2.0W+2.0W)
Power consumption: 9.5V = 5.5W
Dimensions: 93.0(W) × 25.6(D) × 7.3(H) cm (36 5/8 × 10 1/16 × 2 7/8 inch)
Weight: Approximately 3.3 kg (7.3 lbs) (Excluding batteries)
Specifications and designs are subject to change without notice.
Example: To specify the battery type
One beep: Alkaline batteries
Two beeps: Rechargeable nickel metal hydride batteries
● For information about functions, refer to the User's Guide available
on the CASIO Website.
For the location of this key, refer to
the figure below.
For the location of these keys, refer to
the figure below.
● Any reproduction of the contents of this manual, either in part or its entirety, is prohibited.
Except for your own, personal use, any other use of the contents of this manual without
the consent of CASIO is prohibited under copyright laws.
● IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS,
BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE
OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
● The contents of this manual are subject to change without notice.
● Company and product names used in this manual may be registered trademarks of
others.
Model Number: CT-S100
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
A labels rating is affixed to the bottom of the product.
Prepare for initialization.
Execute initialization.
Declaration of Conformity
C
MA1909-B Printed in China
Advertisement
