Panasonic SF2B Series Instruction Manual page 22

<When the intermediate mounting bracket (MS-SF2B-2) (accessory) is used>
Configuration
The intermediate mounting bracket (accessory) configures as follows.
1. Hook the C part into the groove on the side of the body and press it.
Note that the position to fit the C part onto the main body differs from the surface where the
intermediate mounting bracket is fit.
Front side of the main body
Grooves
Front side of the main body
<How to remove the bracket>
Insert a flathead screwdriver into the hole located on the rear side of the C part and tilt it to
the rear side of the main body to remove the C part.
22
Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com
C part D part
For rear
mounting
C part
1
This device
C part
1
1
E part
For side
mounting
2
2
Flathead screwdriver
2
© Panasonic Industrial Devices SUNX Co., Ltd. 2016