Adjusting The Bottle Rack; Removing And Replacing The Fruit And Vegetable Drawer; Replacing The Drawer - Miele K 28202 D edt/cs Operating And Installation Instructions

Adjusting the interior fittings

Adjusting the bottle rack

The bottle rack can be placed at differ-
ent positions in the appliance.
 Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to pre-
vent bottles from touching the back of
the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.
30
Removing and replacing the
fruit and vegetable drawer
The fruit and vegetable drawer sits on
telescopic runners and can be removed
for loading and unloading, or cleaning.
 Pull out the drawer as far as it will go,
and then lift it up and out.

Risk of damage as a result of in-
correct handling.
After removing the drawer, the tele-
scopic runners are fully extended.
Push the telescopic runners back in.

Replacing the drawer

 Place the drawer on the fully retrac-
ted telescopic runners.
 Push the drawer into the appliance
until it clicks into position.