Adjusting The Interior Fittings; Moving The Shelves; Adjusting The Door Shelf/Bottle Shelf; Adjusting Or Removing The Bottle Holder - Miele K 28202 D edt/cs Operating And Installation Instructions

Moving the shelves

The shelves can be adjusted according
to the height of the food.
 Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upwards to pre-
vent food from touching the back of the
appliance and freezing to it.
Stoppers prevent the shelves from be-
ing dislodged by mistake.

Adjusting the interior fittings

Adjusting the door shelf/bottle
shelf
Tip: Only move door shelves/bottle
shelves in the appliance door when they
are empty.
 Push the door shelf/bottle shelf up-
wards, then remove it by pulling it for-
wards.
 Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.
Adjusting or removing the
bottle holder
The bottle holder can be moved left or
right to create more room for drink car-
tons.
The bottle holder can be removed com-
pletely (e.g. for cleaning):
 Pull the bottle holder upwards to re-
move it from the rear edge of the
bottle shelf.
The bottle holder can be replaced after
cleaning.
29