Dynacool Function - Miele K 28202 D edt/cs Operating And Installation Instructions

DynaCool function

When the DynaCool function is not
switched on, the natural circulation of
air in the appliance will cause different
temperature zones in the refrigerator as
the cold, heavy air will sink to the low-
est section of the appliance. You should
bear this in mind when placing food in
the appliance (see "Storing food in the
refrigerator section").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
DynaCool. This way you can distribute
the temperature inside the appliance to
all areas more evenly so that all the
food will be chilled to about the same
degree.
The temperature is set as normal with
the temperature control.
DynaCool should also be selected
when:
- the ambient temperature in the room
is high (above approx. 30 °C), and
- the room humidity level is high.
Using Super cool and DynaCool
Switching on DynaCool
 Touch the DynaCool sensor.
The  symbol will appear in the dis-
play.
The fan is running. With some appli-
ances it only switches on when the
compressor is running.
Switching off DynaCool
Because DynaCool requires more en-
ergy, you should switch it off under nor-
mal conditions.
 Touch the DynaCool sensor.
The  symbol in the display will go out
and the fan switches off.
To save energy, the fan switches off
automatically whilst the appliance
door is open.
23