Panel Event Descriptions - Bosch D623 User Manual

Panel Event Descriptions

The following table lists the events generated by the control/communicator. These events appear in the control/
communicator log by name and in the pager display by event number.
Event Event
#
01 AC Fail
02 AC
Restore
03 Alarm,
Tamper
04 Alarm,
Emergency
05 Alarm,
Panic
06 Alarm,
Invisible
07 Alarm,
24-hr.
Burg
08 Alarm,
Cntrl, Dly
09 Alarm,
Cntrl
10 Cross,
Tamper
11 Cross,
Emergency
12 Cross,
Panic
13 Cross,
Invisible
14 Cross,
24-hr.
Burg
Cross,
15
Cntrl, Dly
16 Cross,
Cntrl
17 Cross,
Unverified
18 Alarm Exit
Error
19 Alrm
Recent
Clse
20 Alrm
Recent
Clse
21 Auto On
Extended
22 Battery
Low
23 Battery
Missing
© 2003 Bosch Security Systems
Description
AC power to panel interrupted.
AC power to panel restored.
Alarm from detection device tampered
with.
Alarm from emergency detection device
or ABC key programmed for emergency
response.
Alarm from panic/emergency detection
device.
Alarm from detection device that does
not appear at command center during
alarm or trouble conditions.
Alarm from burglary detection device
on 24 hours per day.
Alarm from detection device with
entry/exit delays.
Alarm from detection device such as
keyswitches, motion detectors
(followers), or devices that initiate an
alarm immediately (do not follow any
entry/exit delays).
Tamper alarm from detection device
with Cross Point option selected.
Emergency alarm from detection device
with Cross Point option selected.
Panic alarm from detection device with
Cross Point option selected.
Panic alarm from invisible detection
device with Cross Point option selected.
Burglary alarm from detection device
with Cross Point option selected.
Alarm from entry/exit detection device
with Cross Point option selected.
Alarm from keyswitch, follower, or
instant detection device with Cross
Point option selected.
Fault on one non-fire point type with
Cross Point option selected. This is not
an alarm event.
Detection device faulted at end of exit
delay.
Alarm event within 2 min. of closing.
Alarm event within 2 min. of closing.
Auto On sked delayed 1 hr. by user.
Report follows Open/Close routing.
Panel backup battery is low.
Panel backup battery missing. Very low,
shorted, or open batteries reported as
missing.
D623/D625 User Guide
Event Event Description
#
24 Rstrl Batt Battery restoral from low battery.
Low
25 Rstrl Batt Battery restoral from missing battery.
Missing
26 Bypass, Selective bypass by user of fire detection
Fire, User device.
27 Bypass, Selective bypass of fire detection device
Fire, by RAM IV.
RAM IV
28 Bypass, Selective bypass by user of controlled
Ctrl, User detection device.
29 Bypass, Selective bypass by RAM IV of
Ctrl, controlled detection device.
RAM IV
30 Bypass, Selective bypass by user of 24-hr. non-
24-hr, fire detection device.
User
31 Bypass, Selective bypass by RAM IV of 24-hr.
24-hr., non-fire detection device.
RAM IV
32 Bypass, Detection device force-armed
Forced Pt
33 Bypass, Point swinger bypassed.
Swinger
34 UnBypass, User cleared bypass (unbypass) of fire
Fire, Usr detection device.
35 UnBypass, User cleared bypass (unbypass) of
Ctrl, Usr controlled detection device.
36 UnBypass, User cleared bypass (unbypass) of 24-
24-hr., Usr hr. detection device.
37 Call For Report sent automatically at Call For
Service Service interval. Does not indicate a
trouble condition.
Cancel User acknowledged active alarm before
38
Alarm bell time expired for non-fire detection
device.
39 Cancel User acknowledged active alarm before
Fire bell time expired for fire detection
device.
40 CheckSum Checksum on panel parameters failed.
Fail Contact security company to verify
panel program.
41 CheckSum Checksum on SDI device parameters
Fail, SDI failed. Contact security company.
42 Cls, All, System turned All On with entry/exit
+Dly, Skd delay by sked.
43 Cls, All, System turned All On with entry/exit
+Dly, KS delay by keyswitch.
44 Cls, All, System turned All On with entry/exit
+Dly, delay by
RAM IV RAM IV.
45 Cls, All, System turned All On with entry/exit
+Dly, Tel delay by telephone.
46 Cls, All, System turned All On with no delay
-Dly, Usrl (instant) by user.
Page 43
Security System
User Guide
46841D