Exciter Power Supply; Communication Among Rf Drawers - Hitachi EC701HP Operation Manual

Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
5.6.4
This screen shows the power supply status, indicating 'OK' or 'Fail'. The measured voltages are
+3.3V, +15V, +5V and +28V.
Starting from the Measurements Menu [2000]:
Use the Up and Down keys,
5.6.5
From the LCD screen it is possible to conduct and view a diagnostic check f the communication
link between the exciter unit and the RF power amplifier drawer ('P01).
Press ESC, to the Main Menu screen, and then to the screen [2000] is reached, as below:
Manual Rev. 0.1 - February 2018
>

Exciter Power Supply

>
Select Exciter Power Supply and hit Enter
> >

> >
Hit ESC key to return to the Measurements screen.

Communication among RF drawers

>
Select Communication Status and press ENTER.

and , to check the following voltage measurements.
5-36