Monitoring And Disconnecting The Storage Ssd - Motorola Avigilon ACC VMA-RPA-RGD-8P2 User Manual

CAUTION — You will lose recorded video and configuration data if you forget your password. To
reset the administrator password, you must reset the device to the factory default settings. For more
information on performing a factory restore, see
Time pane to customize how the device keeps time:
l
Select your Time Zone from the drop-down list. The time zone that you set here is used by the
l
recording schedules defined in the ACC Client software.
Select whether you want to keep synchronized time through a Network Time Protocol (NTP)
l
server (recommended) in the NTP field.
Select:
DHCP to automatically use the existing NTP servers in the network.
l
Manual to enter the address of NTP servers in the Servers list. Controls to add and
l
delete addresses in the list, and reorder them are activated.
Off if you do not use an NTP server.
l
Note: The default set of NTP servers is always present in the Servers list. The default
list cannot be rearranged or deleted:
0.pool.ntp.org
l
1.pool.ntp.org
l
2.pool.ntp.org
l
3.pool.ntp.org
l
Click Apply to save the time settings.
Upgrade Firmware pane to install the latest version of the firmware on your device, or to reinstall the
l
firmware if it becomes corrupted. For more information, see
Certificates pane to manage the certificates used by the ACC ES Admin Web UI and the device. For
l
more information, see

Monitoring and Disconnecting the Storage SSD

On the Storage panel of the ACC ES Rugged 8-Port Appliance you can:
View the storage capacity and the status of the replaceable storage SSD.
l
Set the status of the storage SSD to Eject, prior to removing it from the appliance for replacement if it
l
ever fails.
Important: The storage SSD must be replaced with an SSD of the same capacity (2TB for the
Monitoring and Disconnecting the Storage SSD
Restoring Factory Default Settings on
Managing Certificates on page 33.
page 40.
Upgrading the Firmware on page 36.
23