Power - Canon WUX6000 User Commands

POWER

Power supply control
Format
Setting Command
Response
Reference Command
Response
< Power control parameter:ID >
Parameter
ON
OFF
< Power mode parameter:ID >
Parameter
OFF
OFF2ON
ON
ON2OFF
PMM
PMM2ON
ON2OFF
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM
No Yes Yes Yes
Remarks
(1) Lamp Replacement Preparation, "Lamp Replacement Warning," and ""Air Filter Cleaning
Warning" are displayed for 10 seconds, regardless of whether the projector was started by the
button or command.
(2) Note that there are different parameters for the setting command and the reference
command.
Example
(Control)
>POWER=ON
<i:OK
(Reference)
>GET=POWER
< g:POWER=OFF
Note: '>' indicates a command; '<' indicates a response.
POWER=<power control parameter:ID>
i:OK
GET= POWER
g: POWER = < Power mode parameter:ID >
Note: See "Error list" for any response other than the above.
Power ON
Power OFF
Power OFF
OFF -> ON in transition
Power ON
ON -> OFF in transition
Lamp OFF
Lamp OFF -> ON in transition
ON -> OFF in transition
RS-232C
ON ST PM ON D-RGB
Yes Yes Yes Yes Yes
-72-
WUX6000 User Commands
Meaning
Meaning
Input
A-RGB COMP HDMI LAN
Yes Yes Yes
USB None
Yes Yes Yes