Set Power-Saving Settings - Canon WUX500ST Quick Start Manual

Set Power-Saving Settings

Set power-saving settings as needed.
The following four settings are available. For details, refer to the page describing
each function.
• Lamp mode
Adjust lamp and fan power consumption in the image mode.
• Power management mode
Automatically turns off the lamp or the power after a certain period if the projector
is idle without an input signal.
• Power management duration
Specify the period after which the lamp or the projector should go off
automatically if left idle without an input signal when [Power management mode]
is set to [Lamp off] or [Standby].
• Network standby settings
Conserve energy in standby mode, as needed.
Setting Up Power-Saving Features
1
Press the ECO button on the remote control to display the following
window.
Remote control
2
Press the [ ] / [ ] buttons to select a menu.
3
Complete the setting for the selected function.
58