Changing The Speaker Setting - Sharp CD-DD4500 Operation Manual

Changing the Speaker Setting

You can change the setting as you like.
The initial set up was made when shipped from the factory.
The unit can be used as it is, straight out of the box.
Speaker size setting
1
Press the MENU button repeatedly to select "SP SIZE".
2
Within 8 seconds, press the ITEM button to select "FRONT".
"FRONT" appears on the display.
3
Within 8 seconds, use the SET UP ( W W W W W or X X X X X ) button on the re-
mote control to select "LARGE" or "SMALL".
LARGE:When the front speakers can reproduce low frequencies (speakers
which can reproduce sounds lower than 60 Hz)
SMALL: When the front speakers cannot reproduce extremely low frequencies
4
Repeat the operation in steps 2 and 3 above to select "SUR-
ROUND", "CENTER" and "S-WOOFER".
Each of these items can be set separately.
Surround speakers:
Centre speaker:
Subwoofer:
disappear
YES: When the speakers are connected
NO: When no speaker is connected (When NO is selected, the indica-
tor for that speaker position will go out.)
INT: Setting of the internal subwoofer
EXT: Setting of the external subwoofer (see page 36.)
Notes:
When all 5 speakers have been connected, set each of the items to "YES" and the
subwoofer to "SW-INT".
The sound is output from the subwoofer when in the Bypass/Virtual mode, even if
the setting of subwoofer is changed.
CD-DD4500
disappear
disappear
disappear
ENGLISH E-28
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15