Dubbing From Tape To Tape - Sharp CD-DD4500 Operation Manual

Dubbing from Tape to Tape

You can record from TAPE 1 to TAPE 2.
For recording, use only normal tapes. Do not use metal and CrO
1
Press the POWER button to turn the power on.
2
Load a prerecorded cassette into the TAPE 1 cassette compart-
ment. Insert a blank tape into the TAPE 2 cassette compartment.
It is recommended that the recording tape be the same length as the master
tape.
3
Press the TAPE (1 V V V V V 2) button until "TAPE 1" appears in the
display.
4
Press the REC PAUSE I6 I6 I6 I6 I6 (I6 I6) button. I6 I6 I6
Recording will be paused.
5
Press the 0 0 0 0 0 / R R R R R ( 0 0 0 0 0 ) button to start dubbing.
To stop dubbing:
Press the (TAPE ) button.
TAPE 1 and TAPE 2 will simultaneously stop.
Erasing recorded tapes
1. Load the tape to be erased into the TAPE 2 cassette compartment.
2. Press the TAPE (1 V 2) button until "TAPE 2" appears in the display.
3. Press the REC PAUSE I6 (I6) button. ("ERASE" will appears.)
4. Press the 0 / R ( 0 ) button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
CD-DD4500
tapes.
2
E-24
ENGLISH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15