General Control - Sharp CD-DD4500 Operation Manual

General Control

Demonstration mode
The first time the unit is plugged, the unit will enter the demonstration mode. You will
see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the X-
BASS/DEMO button.
The demonstration mode will be cancelled and the display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to select the extra bass
mode.
To turn the power on
Press the POWER button to turn the power on.
To set the unit to stand-by mode:
Press the POWER button again.
Display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER button.
Dimmed
CD-DD4500
Brightened
ENGLISH E-12
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15