Ipv4 Route Table; Ipv6 Static/Default Route - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Gateway
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IPv4 Route Table

This window is used to display and configure the IPv4 route table settings.
To view the following window, click L3 Features > IPv4 Route Table, as shown below:
The fields that can be configured are described below:
Parameter
Show All
Connected
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IPv6 Static/Default Route

This window is used to display and configure the default IPv6 route settings.
Description
Only the Default Route is supported.
Enter the gateway address for this route here.
Figure 6-11 IPv4 Route Table Window
Description
Select this option to display all IPv4 routes.
Select this option to display only connected routes.
79