DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Level
List Name
Method 1 ~ Method 4
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
RADIUS
RADIUS Global Settings
This window is used to display and configure the global RADIUS settings.
To view the following window, click Security > RADIUS > RADIUS Global Settings, as shown below:
The fields that can be configured in RADIUS Global Settings are described below:
Parameter
DeadTime
Click the Apply button to accept the changes made.
The fields that can be configured in RADIUS Server Attribute Settings are described below:
Parameter
RADIUS Server Attribute
NAS-IP-Address
Click the Apply button to accept the changes made.
Description
Select the privilege level used here. Options to choose from are levels 1 to 15.
Enter the method list name that will be used with the AAA accounting
commands option here.
Select the method lists that will be used for this configuration here. Options to
choose from are none, group, and tacacs+. The none option is only available
for Method 1.
Figure 7-12 RADIUS Global Settings Window
Description
Enter the dead time value here. This value must be between 0 and 1440
minutes. By default, this value is 0 minutes. When this option is 0, the
unresponsive server will not be marked as dead. This setting can be used to
improve the authentication processing time by setting the dead time to skip the
unresponsive server host entries.
When the system performs authentication with the authentication server, it
attempts one server at a time. If the attempted server does not respond, the
system will attempt the next server. When the system finds a server does not
respond, it will mark the server as down, start a dead time timer, and skip them
in authentication of the following requests until expiration of the dead time.
Description
Enter the RADIUS server's attribute NAS-IP-Address here.
89