Operating Mode; Status Message; Settings - AEG SW 600 W Manual

Operating mode

Fig. 4: Operating mode
1. Tap the "Operating Mode" icon [C]. The current
selected mode will be displayed.
2. Tap the icon to change the mode.
3. Tap the arrow at the outside right to return to
the start screen.

Status message

Fig. 5: Status message
1. Tap the "Status notification" icon [D]. All avail-
able safety functions will now be listed.
2. If an error exists, the icon will be red. The active
safety function is marked red.
3. Tap the arrow at the top left to return to the
start screen.

Settings

K
L
M
Fig. 6: Settings
1. Tap the "Settings" icon [E].
2. under "Timer (00:00)" [K], set the duration after
which the voltage converter will be switched off.
3. Change the Bluetooth® name [L] (optional). The
factory Bluetooth® name is "AEG-Inverter".
4. Change the password and assign a new pass-
word [M] (optional). Remember and, if necessary,
make a note of your password. The default
password is "123456".
5. Tap the arrow at the top left to return to the
start screen.
English 39