Setting A Programme; Interrupting A Programme And Changing The Options; Cancelling A Running Programme - Zanussi ZWF 71453BW User Manual

A

SETTING A PROGRAMME

1. Turn the programme knob to switch the
appliance on and set the programme:
• The indicator of the button Start/Pauze
Départ/Pause flashes.
• The display shows the programme duration.
2. If necessary, change the temperature and the
spin speed or add available options. When you
activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message
STARTING A PROGRAMME WITHOUT THE
DELAY START
Press the button Start/Pauze Départ/Pause.
• The indicator of the button Start/Pauze
Départ/Pause stops to flash and stays on.
• The programme starts, the door locks, the
indicator
• The programme time decreases with steps
of one minute.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
STARTING A PROGRAMME WITH THE DELAY
START OPTION
1. Press the button Startuitstel/Départ différé
again and again until the display shows the
delay you want to set. The delay start indicator
comes on.
2. Press the button Start/Pauze Départ/Pause:
• The door is locked and the indicator
on.
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
When the flap is in posi-
tion B and you want to
use powder detergent:
1. Remove the drawer.
2. Adjust the flap in po-
sition A.
3. Put back the drawer
in the recess.
is on.
You can cancel or change the set of
the Startuitstel/Départ différé option
before you press the button Start/
Pauze Départ/Pause. After pressing
the button Start/Pauze Départ/Pause
you can only cancel the Startuitstel/
Départ différé option.
To cancel the Startuitstel/Départ différé option:
a. Press the button Start/Pauze Départ/
Pause to set the appliance to pause. The
indicator of button Start/Pauze Départ/
Pause flashes.
b. Press the button Startuitstel/Départ différé
until the display shows
Press the button Start/Pauze Départ/
Pause again to start the programme
immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
.
1. Press the button Start/Pauze Départ/Pause.
The indicator flashes.
2. Change the options.
3. Press the button Start/Pauze Départ/Pause
again.
The programme continues.

CANCELLING A RUNNING PROGRAMME

1. Turn the programme knob to position
cancel the programme and to deactivate the
appliance.
2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
OPENING THE DOOR
While a programme or the Startuitstel/Départ
différé operates, the appliance door is locked. The
is
indicator
CAUTION! If the temperature and
level of the water in the drum are too
high and the drum still rotates, you
cannot open the door.
.
is on.
to
13